MikroTik: Configuring Radio as Bridge

Login into the radio using Winbox.

1. Click on the wireless Tab and go to Interface on the appeared window.

Enable the wireless interface and click it to bring this window up

On Mode: choose station-WDS

Station WDS- This allows you to connect to an AP that is in Wireless Distribution mode. This will allow you to do a straight bridge with multiple clients.

2.To add IP Address

Click on IP Tab to select Address

Add the IP on the ether1 interface

3. To add Gateway

Go to IP - Routes and Add Gateway on gateway place

4. Go to Bridge to add Bridge1 by clicking on + sign

Then click Ports Tab to add Wlan1 and ether1 ports on bridge1

There you go! you have configured the radio as bridge.